13
Pinning:
1
Ground
35.
Ground
2
Ground
36.
Supply Voltage
3
5 MHz Clock Out
38 47. Picture Bus Chroma
4
Standby Supply Volt
48 50. Picture Bus Priority
5
Analog Crystal Out
51.
Ground
6
Analog Crystal In
52.
VGAV Input
7
Ground
53.
Front-End/ Back-End Data
9
Ground
54.
Reset Input, Active Low
10 Interlace Out
55.
I2C Bus Data
12 Vertical Sync Pulse
56.
I2C Bus Clock
13 Front Sync Pulse
57.
Test Pin, connect to GND
14 Main Sync/Horiz Sync Pulse
58.
Video 4 Analog Input
15 Helper Line Output
59.
Ground
16. Horz Clamp Pulse
60.
Video 3 Analog Input
17. Active Video Out
61.
Video 2 Analog Input
18. Double Output Clock
62.
Video 1 Analog Input
19. Output Clock
63.
Chroma/ Video 4 Analog Input
20...29.Picture Bus Luma
64.
Analog Video Output
26. Ground
65.
Analog Shield GND F
27. Not Connected
66.
Supply Voltage, Analog Front-End
30. Main Clock Output 20.25 MHz
67.
Signal Ground for Analog Input
31. Supply Volt
68.
Reference Voltage Top, Analog
34. Ground
CIP3250:
The IC is used to interface the analog input, which is output from the PIP module (SCART RGB or PIP RGB). As can be seen
from the block diagram, there is a CT-BR-SAT block, which is used for luma contrast, brightness, hue, and color saturation
correction. The soft mixer is controlled by the fast blank signal.
Features:
n
analog input for RGB or YUV and Fast Blank
n
triple 8 bit analog to digital converters for RGB/YUV with internal programmable clamping
n
single 6 bit analog to digital converter for Fast Blank signal
n
digital matrix RGB % YUV (Y, BY, RY)
n
luma contrast and brightness correction for signals from analog input
n
color saturation and hue correction for signals from analog input
n
digital input for DIGIT 2000 or DIGIT 3000 formats
n
digital interpolation to 4:4:4 format
n
high quality soft mixer controlled by Fast Blank signal
n
programmable delays to match digital YUVin and ana-log RGB/YUV
n
variable low pass filters for YUV output
n
digital output in DIGIT 2000 and DIGIT 3000 formats, as well as RGB 4:4:4
n
I2C bus interface
n
clock frequency 13.5... 20.25 MHz
Summary of Contents for FT-81012
Page 1: ...SERVICE MANUAL UNIVERSUM FT 81012 MODEL ...
Page 33: ......
Page 34: ......
Page 35: ......