USER PRECAUTIONS
Before Use Always Carry Out A Safety Check
(1)
Ensure that all nuts and bolts are firmly fastened.
(2)
Check that the front and rear wheels rotate smoothly, and there are no visible defects.
(3)
Check for correct operation of both front and rear brakes.
(4)
Check alignment of handlebar and saddle. Check for correct height and make sure
they are both secure.
(5) Check that all parts are assembled correctly and are not faulty.
•
Ensure you are appropriately dressed.
•
Never allow more than one rider to use your bicycle at one time.
•
It is essential that you always look in the direction the bicycle is travelling and take care
to avoid pedestrians and unforeseen obstructions.
• When re-adjusting the handlebars or seat,
pay particular attention to the minimum
insertion marks.
•
Routine safety checks and regular maintenance must be carried out. Remember the
more frequently and harder a cycle is used, the more frequently maintenance checks
should be carried out.
•
Always remember that the braking efficiency of a bicycle decreases in wet conditions.
WARNING:
A hard impact or crash can put unusually high stresses and strains on
bicycle components. This may lead to premature failure and therefore loss of control.
Following a hard impact or crash carefully check your bicycle, or better still, take it to your
Universal Dealer for a thorough check.
ALWAYS REPLACE SUSPECT COMPONENTS.
14
Summary of Contents for JUNIOR ATB
Page 1: ...JUNIOR ATB OWNER S MANUAL MAINTENANCE GUIDE ...
Page 23: ...NOTES 22 ...
