BEFORE USE:
CHECKING AND ADJUSTING
YOUR BICYCLE
IMPORTANT
You are advised that adjustments to your bicycle (with the exception of those described in
this section) should be carried out by a competent cycle mechanic or your dealer. If this
service is not available, providing you are sure of your ability to make the adjustments
correctly to the bicycle, it should be understood that any adjustments made, would be
entirely at your own risk.
Keeping the bicycle in the upright position, with one leg either side of the front wheel,
hold the front wheel firmly in position. Loosen the handlebars using the allen key and
adjust the handlebars to the right height and position for use. The mid-section of the
handlebars must be aligned with the front wheel. Tighten into place.
The ideal saddle position suitable for use should allow the toes of the rider to touch the
ground comfortably.
1. Nut
2. Seat Post
To adjust the position of the saddle, loosen the nut on the main unit situated at the
bottom of the seat post and adjust. Once you have adjusted the seat to the position of
your choice, tighten into place.
12
2
1
Summary of Contents for JUNIOR ATB
Page 1: ...JUNIOR ATB OWNER S MANUAL MAINTENANCE GUIDE ...
Page 23: ...NOTES 22 ...
