Parts Breakdown for UT2010
UT2010
UT2010
Specifications
Free Speed RPM....................................................................175
Drive..................................................................................1/2-in.
Working Torque................................................................75ft.-lbs.
Length...........................................................................14-1/8-in.
Weight..............................................................................4.4 lbs.
Air Inlet...............................................................................1/4-in.
Recommended Hose Size.....................................................3/8-in.
Average Air Consumption.................................................... 5 CFM
Maximum operating pressure............................................... 90 PSI
Diameter..................................................................................1-1/2-in.
USE ONLY POWER SOCKETS & ACCESSORIES
Sockets and accessories used shall be of the power socket type. Always check sockets,
retainers and drives regularly for wear or damage and replace whenever necessary
Limited Warranty
Universal Tool warrants its tools to be free from defects in material and workmanship for one year
from the date of purchase. This warranty does not apply to tools which have been abused,
misused, modified or repaired by someone other than Universal Tool or its authorized service
centers. If a Universal Tool proves defective in material of workmanship within one year after
purchase, return it to any authorized service center or to Universal Tool, freight prepaid. Please
enclose your name, address and adequate proof of purchase date with a brief description of the
defect. Universal Tool will, at its option, repair or replace defective tools, free of charge. Repairs or
replacements are warranted as described above for the remainder of the warranty period. Univer-
sal Tool's sole liability and your exclusive remedy under this warranty is limited to repair or replace-
ment of the defective tool. There are no other warranties expressed or implied and Universal Tool
shall not be liable for incidental, consequential or special damages, or any other damages, costs or
expense of repair or replacement as described above.
1/2” Ratchet Wrench
1/2” Ratchet Wrench
Ref. Description
Model No.
Qty.
Ref.
Description
Model No.
Qty.
1
Motor Housing
9HD-12001
1
26
Idler Gear
9HD-12026
3
2
Inlet Bushing
9HD-12002
1
27
Steel Ball
9SB-006
3
3
Spring Pin
9SP-25220
1
28
Ratchet Housing
9HD-12028
1
4
Throttle Lever
9AR-38005
1
29
Needle Bearing
9HD-12029
1
5
Valve Screw
9VP-70041
1
30
Spring Pin
9SP-25060
1
6
O-Ring
9ORP-0110
1
31
Crank Shaft
9HD-12031
1
7
Valve Spring
9VP-70037
1
32
Drive Bushing
9HD-12032
1
8
O-Ring
9ORP-0060
1
33
Ratchet Yoke
9HD-12033
1
9
Valve Stem
9VP-70035
1
34
Reverse Button
9HD-12034
1
10
Bearing Cap
9VP-70011
1
35
Needle Roller
9NR-60160
1
13
Ball Bearing
9BB-06082
1
36
Reverse Spring
9HD-12036
1
14
Rear End Plate
9HD-12014
1
37
Lock Pin
9HD-12037
1
15
Rotor 9HD-12015
1
38
Pawl
9HD-12038
1
16
Rotor Blade
9HD-12016
4
39
Ratchet Anvil
9HD-12039
1
17
Spring pin
9SP-30060
1
40
Spring
9HD-12040
2
18
Cylinder
9HD-12018
1
42
Thrust Washer
9HD-12042
1
19
Front End Plate
9HD-12019
1
43
Internal Stop Ring
9RTW-036
1
20
Ball Bearing
9BB-60002
1
44
Needle Roller
9NR-50223
3
21
Clamp Nut
9HD-12021
1
45
Bushing
9AP-70030
1
22
Washer
9HD-12022
1
47
O-Ring
9ORP-0180
1
23
Ball Bearing
9BB-62000
1
49
Air Regulator
9AP-70034
1
24
Internal Gear
9HD-12024
1
50
O-Ring
9ORP-0080
1
25
Idler Gear Plate
9HD-12025
1
51
Washer
9HD-12051
1
