background image

Table of Contents:

Page #

Smoke Alarm Limitations and Functions ................................. 2

Recommended Location of Alarms ......................................... 2

Avoid These Locations ........................................................... 3

Early Warning ......................................................................... 4

Installation Instructions ........................................................... 4

Electrical Shock Hazard ......................................................... 4

Locking/Tamper Feature ......................................................... 4

Wiring Instructions .................................................................. 5

Operation, Testing & Maintenance .......................................... 6

QUICK FIND

®

 Alarm Originating Feature & Reset .................. 6

Cautions/Warnings ................................................................. 7

Backup Battery Replacement ................................................. 7

Develop and Practice a Plan of Escape .................................. 8

Operational Summary ............................................................. 9

Warranty ................................................................. Back Cover

SECURITY INSTRUMENTS, INC.

MODEL MI106, MI106L

MODEL MI100, MI100L

READ ALL INSTRUCTIONS

This smoke alarm uses an extremely small amount of a radioactive
element in the ionization chamber. Do not tamper with radioactive sealed
source or try to repair the smoke alarm yourself.

Summary of Contents for MI100











Reviews: