Example:
Memory button M
1
in the SAT mode can be set up to do the following functions: to turn on
the Satellite receiver, select channel #
18
on the satellite receiver, and then turn on the TV.
Step
1
:
Press the SAT and MUTE buttons, simultaneously.
Note: SET will appear in the LCD.
Step
2
:
Press memory button M
1
.
Note: M
1
will appear in the LCD.
Step
3
:
Press the Power buttons (to turn on the satellite receiver).
Note: M
1 1
will appear in the LCD.
Press the #
1
button (to select the first digit of channel #
18
)
Note: M
1 2
will appear in the LCD.
Press the # 8 button (to select the second digit of channel #
18
)
Note: M
1 3
will appear in the LCD.
Press the TV Device button (to select the TV Device mode).
Note: M
1 4
will appear in the LCD.
Press the Power button (to turn on the TV).
Note: M
1 5
will appear in the LCD.
Step
4
:
Press the Channel (+)button to store the above commands.
Note: SAVE will flash and the current Device mode will appear.
Now, anytime the memory button M
1
is pressed while the remote control is in the
SAT mode, the commands to turn on the Satellite receiver, select the Satellite channel
#
18
and turn on the TV, will be sent out by the remote control.
Memory buttons can be used in any combination you select.
Note: Any previously stored multi-commands on a memory button will be erased
when new multi-commands are stored to that same memory button.
9