www.urcsupport.com/cricket
9
ADDITIONAL PROGRAMMING OPTIONS
Locate the three position switch within the battery
compartment. Set the switch to the middle position
P
to
enter programming mode.
When programming is complete, set the switch to either
CHILD
user mode or
ADULT
user mode before replacing
the battery compartment door.
SETTING TV CONTROL
TV control can be set by inputting the code for your
brand of TV or via a simple code search. Setting TV
control by code input is described in the Quick Start on
page 4.
Setting TV Code by Code Search
1.
With your television ON, and the remote in
Programming mode, press the
CH
S
key.
The LED blinks twice.
2.
Press the
ON/OFF
key once.
3.
Press the
CH
S
key once per second until the
TV turns off.
4.
Press
ON/OFF
. If the TV turns on, press
MUTE
to save the TV code.
5.
If the TV does not turn on, press
CH
T
to go
to the previous TV code and press
MUTE
to
save once the TV turns on.
NOTE:
There are over 200 possible codes, so this may
take a few minutes.
RE-PROGRAMMING FAVORITE CHANNEL KEYS
Cricket comes pre-programmed with 8 favorite kids
channels assigned to keys
3
through
0
. The pre-
programmed buttons can be programmed to new
channels by following the steps below.
CAUTION:
This will program over the channel that was
pre-programmed by your cable provider!
To program a favorite channel, follow these steps:
1.
While in Programming mode, press and hold
the key that you wish to assign a favorite
channel. Release the key when the LED blinks
twice.
2.
Press the digits for the channel number for the
favorite channel that you wish to add.
3.
Press and hold the key that you wish to assign
again until the LED blinks twice.
Kids Remote 2006.fm Page 9 Tuesday, March 6, 2007 3:52 PM
