15
REASSIGNING DEVICE KEYS
The Atlas XL Universal Remote Control can be set up to
control a second TV, PVR, DVD player, or VCR, or any
combination of up to four home entertainment devices.
For example, to have the unit control a TV, a Cable Con-
verter, and
two
VCRs, you will need to reassign the
unused
AUD
key to operate the second VCR as follows:
1.
On the remote control, press
VCR
once.
Then press and hold
SETUP
until the
VCR
key blinks twice, then release
SETUP
.
2.
Enter
9
-
9
-
2
. The
VCR
key will blink twice.
3.
Press
VCR
once, then press
AUD
once. The
AUD
key will blink twice.
4.
The
AUD
key is now ready to be programmed
for your second VCR. See
Programming Device
Control
on page 8.
To reassign other device keys, repeat steps 1 to 4 and sub-
stitute the key sequence using the following chart:
To Reassign
Perform Key Sequence
TV
as 2nd
VCR
key:
TV
-
SETUP
-
9
-
9
-
2
-
VCR
-
TV
TV
as 2nd
AUD
key:
TV
-
SETUP
-
9
-
9
-
2
-
AUD
-
TV
TV
back to
TV
:
TV
-
SETUP
-
9
-
9
-
2
-
TV
-
TV
VCR
as 2nd
TV
key:
VCR
-
SETUP
-
9
-
9
-
2
-
TV
-
VCR
VCR
as 2nd
AUD
key:
VCR
-
SETUP
-
9
-
9
-
2
-
AUD
-
VCR
VCR
back to
VCR
:
VCR
-
SETUP
-
9
-
9
-
2
-
VCR
-
VCR
AUD
as 2nd
TV
key:
AUD
-
SETUP
-
9
-
9
-
2
-
TV
-
AUD
AUD
back to
AUD
:
AUD
-
SETUP
-
9
-
9
-
2
-
AUD
-
AUD
Upon completion of a reassignment, the selected mode
key will blink twice to confirm your selection. Then you’ll
need to program device control (see
Programming Device
Control
on page 8).
Atlas XL Eng/Sp Manual 4/21/03 4:21 PM Page 15
