13
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control capabilities
are locked to the cable converter. The affected keys* are
0
~
9
,
CH+
,
CH-
,
ENTER
, and
LAST
. This will guarantee that
you do not inadvertently change a channel on your TV or
VCR. However, you can de-activate this feature to allow full
access to these keys in the TV and VCR modes.
*NOTE: This feature does not affect the
AUD
mode.
To De-Activate Channel Control Lock:
1.
On the remote control, press
CBL
once.
Then press and hold
SETUP
until the
CBL
key blinks twice, then release
SETUP
.
2.
Enter
9
-
7
-
3
. The
CBL
key will blink twice.
3.
Press
CH-
once. The
CBL
key will blink
four times.
4.
Now, the remote control will provide TV and
VCR channel-control capabilities while in the
TV or VCR mode.
To Re-Activate Channel Control Lock:
1.
On the remote control, press
CBL
once.
Then press and hold
SETUP
until the
CBL
key blinks twice, then release
SETUP
.
2.
Enter
9
-
7
-
3
. The
CBL
key will blink twice.
3.
Press
CH+
once. The
CBL
key will blink twice.
4.
Now, regardless of what mode you select
(i.e.,
TV
,
VCR
, or
CBL
), only the channel
control capability of your cable converter will
be accessible.
Atlas XL Eng/Sp Manual 4/21/03 4:21 PM Page 13
