PAG
.
24
rev 1.0
English
6.TOOLS
Press [Menu] in the TV mode to enter the main menu (OSD
38).
1. Press [
] to select the Tools item.
2. Press [OK] to enter the selected item.
In the Tools menu (OSD 39):
3. Press [
] to select the wanted menu item.
4. Press [OK] to enter the selected item among.
- Information
- Load Factory Default
- Software Upgrade by OTA
- Software Upgrade by USB
- Safely Remove Storage Device
6.1 INFORMATION
1. When you enter to “Information” menu, you will see a
screen like above (OSD 40). The screen displays some
parameters of information of current channel, and this
function same as the function [Information] in the full
screen play mode.
2. Press [Exit] key to draw back from “Tools” menu.
6.2 LOAD FACTORY DEFAULT
When you press [OK] key In the “Load Factory Default” item
(OSD 41):
1. There will pop a dialogue for you to enter the password,
and the default password is “0000”.
2. After you input the correct password, there will show a
warning message to inquiry you “The operation will load
default and erase all the channels that user added,
continue?”.
3. If you select “Yes” option, the all revised parameters of the
receiver will reset to default value. Please carefully to using
this function.
4. In step 1 and step 2, press [Exit] key can draw back from
this item and without saving.
6.3 SOFTWARE UPGRADE BY OTA
This option allows updating the software of the receiver
through the data received by OTA.
1. Please select the multiplex or introduce directly the values
for the updating.
2. Please select “Start” and press [OK] for starting the
software updating (OSD 42).
TOOLS
OSD 38
OSD 39
OSD 40
OSD 41
