English
1
3
1
3 6 7
4
5
2
8
9
U4150
1.
POWER
: Is used to switch between the working mode and the standby mode.
2.
DISPLAY
(4-Digit/7-Segment): Displays the received channel number while operating and time while in
standby mode.
3.
Remote Sensor
: Detects the infrared signals from the remote control unit.
4.
CH+/-
: To change channels or for navigating and changing values in menus.
REMOTE CONTROL & PANEL DESCRIPTION
1. REMOTE CONTROL & PANEL DESCRIPTION
2
3
4
1.2 REAR PANEL DESCRIPTION
1.
ANTENNA INPUT
:Terr. input of the digital tuner.
2.
RS-232
: Serial Port allowing software upgrades
3.
LOOP OUT
: Terr. ouput for cascading to others devices.
Note:The operation of another receiver at the same time is only possible with limited channel selection
4.
TV SCART
: Output SCART for the connection to a TV set
5.
VCR SCART
: Output SCART for the connection to a VCR
6.
S/PDIF
: Coaxial output for digital audio (AC3)
7.
Optical S/DIF
:Optical output for digital audio (AC3)
8.
AC IN
: Mains input cable
9.
POWER ON/OFF
: Allows to completely switch off the receiver
