6
Electrical installation (Model U305-1 only)
Insert the plug into a 230V 16A, earthed wall socket. The stove is a plug-in model with
a 16A power supply. It is therefore not possible to use all the plates and oven at the
same time. Set the selector to the required position.
Do not set the knob to the
unmarked position.
Remove the cover and stove from the packaging,
and position the stove on a hard,
even floor (do not put the stove on a base.)
Coating or veneer used on fitted furniture must be applied with a heat resistant
adhesive (100
℃
). This prevents surface deformation or detachment of the coating.
If you are
unsure of your furniture’s heat resistance, leave approximately 25mm of
free space around the cooker. The wall behind the cooker should be resistant to high
temperatures. The back of the stove can warm up to approximately 50
℃
above the
ambient temperature when in use.
INSTALLATION
WARNING!
Do not use adapters, reducers, or extension cords to connect this
appliance to the mains power supply.
Failure to follow this advice may result in overheating, burning, or fire.
3 Plates
Bake and 2 small plates
Grill and 2 small plates