12
WARNING!
When using the pre-heating function, it is recommended that the oven door is closed.
When the grill is in use, accessible parts can become hot - Keep children away from the
oven.
For Plug-in Model U305-1
All three plates will function provided the bake or grill function for the oven is
NOT
selected. (See Page 6)
If either bake or grill is selected, the large plate is automatically switched off.
The oven will either bake or grill depending on your selection but will not bake and
grill simultaneously.
To bake, turn the thermostat to the required temperature and select bake on the
selector switch.
To grill, turn the selector switch to grill, the grill element will come on.
Plates may be wiped with a thin layer of cooking oil after use to prevent rusting.
Set all switches to ‘0’ position when not in use.
For 500mm Stove Range
Turn the control switches to ‘0’ position when plates are not in use.
To operate the oven, turn the temperature control knob to the desired setting. When
the pilot light goes out, the oven has reached the desired temperature. The pilot light
will continue to go on and off during the period of use in a set temperature range.
To grill, turn the temperature control knob until it reaches “Grill”.
For 600mm Ceramic Hob Only
RESIDUAL HEAT INDICATOR (HOT SURFACE INDICATOR)
Each heating element has a corresponding residual heat indicator light. This light
switches on automatically when the temperature of the corresponding cooking zone
exceeds 60
℃
. Once a cooking zone has been turned off, the corresponding residual
light will stay on until the cooking zone has cooled down to 60
℃
.