PROFINO REVOLUTION PLUS (REF. 6711)
4
1.4.
Hardware installation
F
IGURE
1:
T
OP VIEW OF PRODUCT
1.5.
Mounting the Profino Revolution Plus
•
Important:
Mount the module vertically to a wall
in a well-ventilated room and leave a minimum
space of 15 cm around the product to guarantee a
maximum ventilation of the product
•
Connect an earth wire to the grounding clamp
•
Connect the power adapter cord to the power
supply socket. Check the status LED for the
indication of DC power presence
•
Connect the inputs to the Profino Revolution Plus
•
Connect a coaxial cable to the output connector
for distribution of the signal
•
Connect a network analyser to the test port to control the signal quality
•
Configure the Profino Revolution Plus using the rotary button, see below
•
The power adapter can easily be replaced without disconnecting the product. To do so,
open the top left plastic cover by pushing the click at the opposite side of the mains
connector
