Optical Headend (Ref. 4002 & 4003)
4
2.
C
ONFIGURATION OF THE MODULE
Select LNB Type:
With this switch you can select the frequency range of the Sat input signal. This is necessary to
make the Automatic Slope Control (ASC) working properly. If signals of a Quattro LNB are
inserted, then set the switch to "Q". If Wideband signals are inserted, set the switch to "WB".
Select # splits (only for REF. 4003):
With this switch you can select the number of splits in your system, this is necessary to make
the Automatic Gain Control working properly.
