EXAMET-4 SERIES MICROSCOPE
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
21
OPERATION
(continued)
Using the Color Filter
- Transmitted Illumination
(Fig. 33)
The color filter can make the background more
suitable and increase the image.
To insert the filter, place it as shown in Fig. 33
with the rough side down.
Replacing the Fuse
(Fig. 34)
Turn the power switch to “0” (OFF) before
replacing the fuse, unplug the power cord from
the outlet and disconnect it from the back of the
microscope.
Unscrew the fuse group
from the fuse base
with a flat head (
̶ ) screwdriver.
Install a new fuse and re-install the fuse group
into the fuse base and tighten with the
screwdriver.
Use fuse type: 250v, 3a
Installing & Using the C-Mount
Adapter
(Fig. 35)
Loosen the camera port lock screw
on the
trinocular head and remove the cover
.
Remove the cover
from the c-mount adapter
and insert it into the camera port as shown.
Once in place, tighten the lock screw.
Loosen the lock screw
of the c-mount adapter
and unscrew the _____________
. Screw the
__________
into the camera ____________
and then
Should we delete the above section on the c-
mount
– the Chinglish instructions do not
seem to make sense
?
Fig. 33
Fig. 34
Fig. 35