EXAMET-4 SERIES MICROSCOPE
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
12
DETAILED ASSEMBLY
PROCEDURE
(continued)
Installing the Objectives (Fig. 8)
Rotate the coarse focusing knob to move the
stage into its lowest position.
Install the objectives into the objective
Nosepiece
from the lowest magnification to
the highest in a clockwise direction from the
rear.
Connecting the Power Cords
(Fig. 9)
IMPORTANT: Use care when storing the
power cord so that it does not bend or twist.
Use only the power cord provided with your
microscope.
Make sure the power switch is at “0”(OFF).
Insert the plug
of the reflected illuminator into
the matching socket
on the back of the stand,
and tighten the screw
to secure it.
Insert the plug
of the transmitted illuminator into
the matching socket
on the back of the stand
.
Insert the female end of the power cord into the
power supply socket
on the base of the stand.
Plug the other end of the power cord into a
grounded outlet.
Fig. 8
Fig. 9