12100 POLARIZING MICROSCOPE SERIES
UNITRON
®
16
REPLACING THE FUSE
(Refer to photos on left and bottom of page)
FUSE:
1.0 Amp (T1 AL 250)
CAT#:
149-30-37
To replace the fuse, use a small flat head screwdriver
and insert it into the notch on the bottom of the plug
receptacle on the back of the microscope and pull it
toward you to slide the fuse holder out.
Press the tab on the bottom of the fuse holder to release
the fuse.
Insert a new fuse into the holder and slide the fuse holder
back into the bottom of the plug receptacle making sure it
is firmly in place.