15
4.
TROUBLESHOOTING
If you are experiencing difficulties with your BT GPS receiver, consult
the following troubleshooting table for possible solutions.
BT GPS receiver Problems
Problem
Diagnosis
Solution
Module has
no data output
Power failure
Bluetooth connection
failure
Baud rate is incorrect
Antenna’s view is
obstructed..
Refer to the solution of power
failure
Fix the baud rate at 4800bps
Make the antenna has a clear
view of the sky
GPS data is
not in correct
order
Module takes
a longer time to
start
Module is in cold start
mode
Under cold start mode, the
module will take 50 seconds
to initialize.
Longer TTFF results from
necessary accumulation of
GPS data from each satellite
or obstruction of the sky view
Pocket PC
cannot find BT
GPS receiver
Pocket PC Bluetooth
function not enabled
The power switch of
BT GPS receiver is
not on
BT GPS receiver is in
low Battery Mode
Bluetooth connection
is busy
Make sure the Pocket PC
Bluetooth function is on
Reconnect Pocket PC and BT
GPS receiver again
Recharge the batteries
Reset your Pocket PC and BT
GPS receiver and reconnect
again
If you encounter problems during installation and operation that
cannot be solved from the provided information in this manual, please
contact your dealer or our technical support staff.