Page 15 of 23
Operation HPC Extreme 405 / 520
These machines are equipped with an EMERGENCY STOP switch. In case of
emergency push EMERGENCY STOP (2a).
Before starting the machine EMERGENCY STOP switch (2a) to be unlocked by
slightly turning it clockwise.
Fully open water source.
Unlock/release spray pistol, bleed unit.
Unlock EMERGENCY STOP (2a) by slightly turning it clockwise.
Push switch ON (2).
Be aware of torque and recoil.
Carry out cleaning task.
When pistol is closed, machine is running in circulation mode. If in this
working condition the water temperature exceeds 60 °C a thermo valve
opens, releases small amounts of hot water and same amount of cold
water enters.
After Work
Push EMERGENCY STOP (2a), machine stops.
De-pressurize spray pistol by shortly
opening and closing.
Lock spray pistol.
Disconnect machine from water and power source.
Thoroughly clean high pressure hose. In case of
damage (cuts, abrasions, kinks, etc.) replace high pressure hose for
safety reasons.
Only original high pressure hoses to be used. Otherwise CE
Declaration of Conformity and warranty will expire.
Reel up high pressure hose properly without any loops.
Store machine and accessories in a dry, frost-protected area.
Summary of Contents for HPC Extreme 330
