ENGLISH
11
HOW TO FILL WITH WATER
Make sure that the appliance is
disconnected from the mains socket.
Lift the valve cap (V) to let out any
residual steam and unscrew in an
anticlockwise direction.
If the heater was under pressure,
wait for about two minutes.
Use olny water, max 1,5 l. Screw up
the top and lower the valve cap (V).
Use ordinary tap water or deminera-
lized water.
Do not use detergents or other
substances..
Attention: make sure that there is
water in the boiler before turning on
the machine to avoid possible activa-
tion of the safety thermostat.
HOW TO WORK THE HEATER
Insert the plug into the mains socket.
Press the pedal button P to switch on
the appliance.
TRIANGULAR BRUSH
This is attached to the extensions or
directly on to the handle.
Can be used to clean fabric.
A cotton or microfiber cloth can
be fixed to the brush for cleaning
operations.
IRON
For instructions on how to use the
iron please refer to the relevant
instruction handbook.
Other accessories are available as
optional.
Accessories may differ from those represented by type and quantity. Those indicated only explain liaisons and possible uses.
Some accessories may be optional
The warning light
switches on.
This shows that the appliance is
working.
Wait a few minutes until the warning
light
switches off.
Steam is now available for cleaning
or ironing.
NB: while the appliance is in use, the
warning light
will switch on and
off several times; this warning light
may be ignored while the appliance
is being used.
The warning light
indicates that
the heater is empty.
Each time the appliance is used, a
few drops of water may come out
when the start button is pressed for
the first time.
This is quite normal and is due to
condensate which forms when the
tube is still cold.
The same thing may happen after an
interval of any great length.
Empty the machine after use.
Summary of Contents for C101
Page 2: ......
