Setup menu
43
Set up motion detection area. Area is consisted of 16x12 regions. When using the mouse, Hold down the left
mouse button and drag to select the area. Hold down the right mouse button to release the area. Clicking the right
mouse button or pressing the MENU button on the remote control or front keys, Motion Setting menu appears.
All On, All Off, Save, Exit can be selected.
3.5.1.1.3. Pou Up
When the motion is detected whether to pop up the linked channel.
3.5.1.2. Pop Down
After releasing the motion detection, set how long to retain the pop up state. CONT, 5s, 10s, 30s can be selected.
3.5.2. Sensor
Figure 3.41. Sensor
It's for sensor setting. Action type, connection channels, whether to pop up the related channel on the sensor input
condition, the dwelling time of the pop-up state can be set by each channel.
3.5.2.1. Number
Select the sensor number to make setting.
3.5.2.1.1. Type
Depending on the sensor, user can select NORMAL OPEN or NOMAL CLOSE.
3.5.2.1.2. Link Channel
Select the connecting channels with sensor. The channel will be recorded when the recording mode is associated
with sensor and sensor is operated.
3.5.2.1.3. Pou Up
Determine whether to pop up the linked channel when the sensor is detected.
3.5.2.2. Pop Down
After the sensor detection is released, set the retaining time period of the pop up state. CONT, 5s, 10s, 30s can
be selected.
