Setup menu
39
3.4.1.1. Mode
Choose How to save the images on your harddisk driver. OVERWRITE, ONCE can be selected. In the
OVERWRITE mode, when the hard disk is full, DVR erases the oldest data while recording is in progress. In the
ONCE mode, When the hard disk is full, DVR stops the recording.
3.4.1.2. Forced Deletion
It is a function that erases forcely the recorded data. Based on the current time, previous data will be erased forcely.
It is meaningful only if the harddisk driver has enough capacity to store more data than the selected date. OFF,
1day ~ 99 days can be set.
3.4.2. S.M.A.R.T.
Figure 3.34. S.M.A.R.T.
3.4.2.1. S.M.A.R.T.
Choose whether to check S.M.A.R.T. test. The test works only ON condition in the check interval. The test results
are recorded in the System Log. There are 3 results which are PASSED, WARNING, ERROR. WARNING is
occured when even one kind of abnormal test is checked, It indicates a potential problem that is likely to occur.
ERROR means that there is possibility to occure serious problems within 24 hours, so back up important data and
need to replace the hard disk.
3.4.2.2. Check Interval
Select the S.M.A.R.T. test period. 6hours, 12hours, 24hours can be set.
