CHAPTER 3: WELDING SYSTEM SET-UP
MODEL HF2 2 kHz HIGH FREQUENCY RESISTANCE WELDING POWER SUPPLY
990-057
3-11
Dual Air Regulator Adjustment (Model 188 - Figure 3-5)
Figure 3-5. Dual Air Actuated Weld Heads Electrical Connections
1
Set the HF2 Weld Control front panel WELD/NO WELD switch to NO WELD.
2
Turn the Power Switch located on the
HF2 Weld Control rear panel to ON.
After a series of power up screens, the
last RUN screen displayed will appear.
Press the [CHNG] key to access the
Weld Graph RUN screen for the BASIC
WELD Function.
