Unitek DVR-404, User Manual

Page: 31 / 127

31
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
z Upgrade the S/W(Kernel, Ramdisk) of DVR
z Install the RAMS program as referred to in section 4.2 of Operation Manual.
z Execute RAMS program and register selected DVR’s IP address & Port number from the DVR
list by clicking following button .
z After selecting the target DVR, enter “ admin ” for ID and “111111” for default password. This
will enable you to access the DVR.
2.9.2 UniPlayer
z
A viewer program with functions for recording, capturing, & backing up files.
2.9.3 Quick Installer
z To setup configuration template for quick & easy, multiple unit setup using RS-232 or network
z To upload/download DVR menu setting from/to DVR as file form using pc.
2.10 Matrix Function
It supports matrix function for convenient operation of multiple DVRs.
Connect multiple DVR with optional cable and connect PTZ controller as below picture.
If user connect monitor with Daisy chains’s Video output port of the last DVR, then it is
available to view all the screen of camera and DVR through the monitor, including operating
of the camera and DVR by controller.
Daisy chain
out
Video spot
RS-485
Matrix Monitor
Video spot
Daisy chain
in
Daisy chain
out
Daisy chain
out
Video spot
RS-485
Matrix Monitor
Video spot
Daisy chain
in
Daisy chain
out