- 21 -
6.5
PRINTER CONNECTION -
Use the standard male-to-male RS232 Cable supplied with the MP5.
6.5.1
Connect one end of the cable to the RS232 Serial Port on the rear of the MP5.
6.5.2
Connect the other end of the cable to the Serial Connector of the Serial-Parallel Converter (SPC-8K).
Serial-Parallel Converter (SPC-8K)
6.5.3
Set the DIP switches on the Serial-Parallel Converter (SPC-8K) as shown below:
DIP SWITCH SETTINGS
Switch Setting Description
1
ON
8 data bits
2 ON No
parity
3 ON DTR
mode
4 ON
5 ON Odd
parity
6 OFF
7
ON
1200 Baud Rate
8 ON