•
Please note when you first use your heater, all the segment are
outwards. You must pull outwards those segments for the
period(s) that you want the heater to work. (If you want to bypass
the timer, check that all the 96 segments are outward) (see Fig
3).
Timer operation
•
Plug in the heater.
•
Unless the clock is already set, turn the timer dial clockwise to
set the clock with the current time of day (see “Clock setting”).
•
Pull the segments outwards for the period you want the heater to
operate. For example, Fig 4. shows that the appliance will
operate from 2 AM to 4.30 AM (10 segments outwards).
•
Push the power switch.
•
Once you have set the segments for the desired heating
period, your heater will cycle on and off according to these
settings.
•
As long as you keep the heater plugged in, the timer will continue
to keep proper time.
Current time 9:00 AM
10 segments outwards
Fig.4
Summary of Contents for UHR-873
Page 8: ......
