a) Push switch one ( I ) 1000W
b) Push switch two ( II ) 1500W
c) Push switches one _ two heat settings together.
c) Add separately the air blower: 400W
3. The power switch lights up when activated.
4. Turning the thermostat control clockwise will increase the "set" temperature.
5. Turning the thermostat anti-clockwise will decrease the "set" temperature.
6. Do not cover the heater at any time during operation. There is a risk of fire if
the heater is covered.
7. Once you have finished using your heater, turn the power switches, and the
thermostat control switch to the "0" positions, and unplug from the mains
supply.
Fan Operation
The fan can be switched on by means of the push button on the fan
unit within the control panel. The fan is switched on when the push
button is in the inward position and off when the button is in the
outward position.
CLEANING YOUR OIL-FILLED RADIATOR
1. Always disconnect the heater from the mains supply before cleaning.
2. Clean the outside of the heater by wiping with a damp cloth and buff
with a dry cloth.
3. Do not use waxes or polishes as these may react with the heater and
cause discoloration.
STORING YOUR OIL-FILLED RADIATOR
1. Save the box for off season storage.
2. Clean the heater following the cleaning instructions above.
3. Remove the wheel base assemblies.
4. Place the heater, and wheel assemblies in the original box, and store
in a cool and dry place.
5. If you choose to store your heater fully assembled be sure to cover it
to protect it from dust.
IMPORTANT SAFEGUARDS
1. Read the instructions carefully before use and save them for future
reference.
2. Always disconnect the heater from the main supply when not in use
and when cleaning.
3. Do not leave the heater "ON" unattended.
