OPERATION
This heater is equipped with Electronic
Digital Controls that provide the
ability to set the temperature to the exact degree desired .To operate ,
simply follow these instructions.
Electrical connection
1. Make sure that the appliance’s voltage and the line voltage match
2. Switch the power switch to 0.
3. Only connect the mains plug to a properly installed earthed socket
220-240V~,50Hz.
Connected Wattage
The power level of the device is
2500W
With this connected load a separate supply line protected by a 16A
household circuit breaker is recommended.
CAUTION overload:
1. If you use extension leads, these should have a cable cross-section of
at least 1.5m
㎡
.
2. Do not use any multiple sockets, as this device is too powerful.
3. Do not connect other high power appliances to the same circuit.
Safety Switch:
Your radiator has a safety switch which turns off the electricity as soon
as the device falls over . The safety switch prevents dangerous
situations caused by overheating.
1. Always place the device in an upright position so that it is stable as
well as in order to prevent malfunctions.
2. The appliance may still remain hot after it has toppled over.
Wait until it has cooled down.
