UNITED UHR-811 Operating Instructions Manual Download Page 2

 

 

- 2 -

WARNING: To reduce the risk of fire, electrical shock, or injury to person: 

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 

instruction concerning use of the appliance by a person responsible for their safety. 

2. Children should be supervised to ensure that they do not play with the appliance. 

3. The product is for household use only.       

4. Connect the appliance to single phase AC supply of the voltage specified on the rating plate. 

5. In order to avoid overheating, do not cover the heater.   

6. Never leave the heater unattended while it is in use. Always turn the product to the OFF position and 

unplug it from the electrical outlet when not in use. 

7. Extreme caution is necessary when any heater is used by or near children, invalids or elderly person 

and whenever the heater is left operating and unattended. 

8. The heater must not be located immediately below an electrical socket-outlet. 

9. Do not run cord under carpeting and do not cover cord with throw rugs, runners or the like. Arrange 

cord away from traffic area and where it will not be tripped over. 

10. Do not operate the heater with a damaged cord or plug, or after the heater malfunctions, has been 

dropped, or damaged in any manner.   

11. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a 

similarly qualified person to avoid a hazard. 

12. Avoid the use of an extension cord as this may overheat and cause a risk of fire.   

13. Use the heater in a well-ventilated area. Do not insert or allow objects to enter any ventilation or 

exhaust opening. To prevent a possible fire, do not block air intakes or exhaust openings in any manner. 

Do not use on soft surfaces, like a bed, where openings may become blocked. Use the heater on flat, dry 

surfaces only. 

14. Do not place this heater near flammable materials, surfaces or substances, as there may be a risk of 

fire. Keep the above flammable materials, surfaces or substances at least 1m from the front of the 

product and keep them away from the sides and rear. 

15. Do not use the heater in any areas where petrol, paint or other flammable liquids are stored e.g. 

Garages or workshops as a hot, arcing or sparking parts inside the heater.   

16. Don’t use this heater in the immediate surroundings of a bath, a shower or a swimming pool. Never 

locate the heater where it may fall into bathtub or other water container. 

17. This heater is hot when in use. To avoid burns and personal injury, do not let bare skin touch hot 

surfaces. If provided, use handles when moving the product. 

18. Be sure that no other appliances are in use on the same electrical circuit as your product as an 

overload can occur. 

19. This heater is filled with a precise quantity of special oil.   

20. Repair requiring opening of the oil container are only to be made by the manufacturer or his service 

agent who should be contacted if there is an oil leakage. 

21. Regulations concerning the disposal of oil when scrapping the appliance have to be followed. 

22. The heater should not be used in a room, of which the floor area is less than 5 M

2

23. The cord shouldn’t be placed nearby the hot surface of the appliance.

 

 

 

 
 
 
 

Summary of Contents for UHR-811







Reviews: