Note:
-After the above setting are completed and P program is working, press “ / / / “to
check the setting time of each day and time periods
- The turn-on time periods 00~24hours, cannot set to minutes
-The “TIME/OFF” cannot be less than “TIME/ON”;
-When the “TIME/ON” is the same as “TIME/OFF”, the time period enter into standby mode;
Note: If main switch off, power cut off, or plug out, it need reset. You can press to
check and set the Time /Day.
Set open-window detection (ONLY by remote control)
：
1). Press“ “
，
the product enter into working status. Heating for a moment until stable.
2). Press” ” by remote control, light “ /
℃
“ will on; The temperature display ”23” by
default. Press” / “to set the desired temperature. During the open-window detection
mode, once the ambient temperature drops 5-10
℃
within 10 minutes, then the product will
stop working within 30 minutes and enter into stand by mode. Then press “
” to turn on
the product.
Press ” “ again to turn off the open-window detection, the light “
”will go off and the
product will resume to previous working mode.
Below is an example to set 23
℃
during open-window detection. See below :F
3).When turn on at the same time for both open-window detection and weekly program,
during the OFF period of weekly program, the product doesn’t work. During the working
status of weekly program, the temperature is subject to the setting temperature of
open-window detection. See below :G
F G
Note:
-
Before turn on weekly program: it must set day and time period, otherwise the weekly
default state is “00”, which does not work.
Maintenance and cleaning
Warning
: Never use detergent, chemical
damage plastic parts.
WARNING : Let the appliance cool down completely before handling or cleaning.
•
To prevent risk of fire or electrocution inside the appliance.
•
Clean the outside wall of the appliance by rubbing it gently with soft, damp cloth,
either with or without soap.
•
Regularly clean the air inlet and outlet vents of the fan.
