UNITED UHB-878 Instruction Manual Download Page 2

 

FOR YOUR OWN SAFETY   

1)  This product is a wall mounting appliance, never use it as portable appliance. 
2)  Do not use the heater unless the feet are correctly attached if the heater is used as portable 

appliance. 

3)  This heater in designed for wall mounting and must be used with the warm air vent facing 

downwards. This heater should not be used in any other orientation and should not be used 
as a free-standing portable appliance. 

4)  This  heater  must  be  installed  so  that  switches  and  other  controls  (except  the  pull  cord) 

cannot be touched by person in the bath or shower 

5)  This  product  is  suitable  for  installation  on  surfaces  with  normal  flammability  e.g.  wood, 

plasterboard,  masonry.  It  is  not  suitable  for  use  on  highly  flammable  surface  (e.g. 
polystyrene, textiles) 

6)  The heater is to be installed so that switches and other controls cannot be touched by a 

person in the bath or shower. 

7)  Before making fixing hole(s), check that there is no obstruction hidden beneath the mounting 

surface such as pipes or cables. 

8)  The chosen location of your new heater should allow for the product to be securely mounted 

(e.g. to a firm wall) and safely connected to mains supply 

9)  Ensure the power supply to the socket into which the heater is plugged is in accordance with 

the rating label on the heater and that the socket is earthed. 

10) Keep the mains lead away from the hot body of the heater.   
11) Do not use outdoors. 
12) Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater. 
13) Do not place the heater on carpets having a very deep pile. 
14) Always ensure that the heater is placed on a firm level surface.    Ensure that the heater is 

not positioned close to curtains or furniture as this could create a fire hazard.   

15) Do not position the heater in front of, or immediately below, a wall socket. 
16) Do not insert any object through the heat outlet or air intake grilles of the heater. 
17) Do  not  use  the  heater  in  areas  where  flammable  liquids  are  stored  or  where  flammable 

fumes may be present. 

18) Particular care should be taken when the heater is situated in areas occupied by children or 

invalids. 

19) Always unplug the heater when moving it from one location to another. 
20) Do not use the heater if the power cord is damaged.    If the power cord is damaged it must 

be replaced by a recognized service agent or other qualified person.   

21) Only use a suitable 220-240V electrical socket. 
22) The room which is to be heated should not contain any easy inflammable materials (e.g., 

petrol,  solvents,  spray  canisters  etc.)  or  other  easy  combustible  materials  (e.g.,  wood  or 
paper). Keep such materials away from equipment. Risk of fire!! 

23) This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their  safety.  Children  should  be  supervised  to  ensure  that  they  do  not  play  with  the 
appliance. 

means “DO NOT COVER”

 

 
 
 

Summary of Contents for UHB-878










Reviews: