4
non-metal belts or rope (NOT supplied in the packing). Only spread sheets or thin cotton-padded
mattress on the blanket. Make sure they are laid flat to help conduct heat and to be able to see
whether the electric blanket is uneven. With everything flat on the bed the electric blanket can be
used safely.
General temperature adjustment: Plug power cord into an AC220-240V~ 50Hz wall outlet (do not
connect this appliance with DC) before bedtime.
•
Microcomputer-timing setting controller adjustment: 1-10hours
o
User can adjust the time based upon their needs. In case of no adjustment being
made, the system will operate at the default setting of 8 hours, while displaying
remaining operating time.
•
The temperature can be adjusted in 5 levels: 5/4/3/2/1/5 button circulation
o
Setting 5,setting 4, setting 3 for fast 15 minute pre-heat operation. In case you do
not need fast heating, press “Cancel” button, and then “Temperature” button so as
to enter Constant temperature state.
o
Humanized design: To avoid excessive heating, after operating on “setting 5” or
“setting 4” for 3 hours, the system can change to “setting 3” so as to maintain
warmth
•
Set the temperature by pressing "temp" (red light will glow)
•
Set the time by pressing "time" (green light will glow)
•
When the time is up, the controller will turn off automatically
Dual control (applicable for double size models only): Equivalent to two single beds combined. Two
people can adjust according to their own needs without interfering with each other.
When the electric under-blanket is in operation, the controller must be uncovered in a position that
Timer mode up to 10h
1h lighting: 1h– off
2h lighting: 2h– Off
1h li 2h lighting: 3h– Off
4h lighting: 4h– Off
1h li 4h lighting: 5h– Off
2h li 4h lighting: 6h– Off
1h + 2 + 4 lighting: 7h– Off
8h lighting: 8h– Off
1h li 8h lighting: 9h– Off
2h li 8h lighting: 10h– Off
Temperature
: to
adjust the
temperature
Time
: to adjust timer
off
Cancel
: to make new setting
ON/OFF
: ON for
power – OFF when
no use
