United Technologies MobileView 9000 Series User Manual Download Page 49

Page: 49 / 56

enable or disable the RTSP authentication.

Note:

If you disable the RTSP authentication, anyone can access the video

stream by the RTSP protocol via the IP address.

3. Click

Save

to save the settings.

Anonymous Visit

Enabling this function allows visits by users who do not have the user name and
password of the device.

1. Enter the Anonymous Visit interface:

Configuration> Advanced Configuration> Security > Anonymous Visit

Figure 47: Anonymous Visit

2. Set the

Anonymous Visit

permission

Enable

Disable

in the drop-down list

to enable or disable anonymous visits.

3. Click

Save

to save the settings.

There will be a checkbox of Anonymous the next time you log in.

MobileView 9000 & 9100 Series Analog/IP Camera User Manual

Summary of Contents for MobileView 9000 Series

























































Search results

Summary of Contents for MobileView 9000 Series

Reviews:

Related manuals for MobileView 9000 Series

Brands by name

Popular brands

United Technologies MobileView 9000 Series, User Manual

Search results

Summary of Contents for MobileView 9000 Series

Reviews:

Related manuals for MobileView 9000 Series

Brands by name

Popular brands