Figure 21: SNMP Settings
2. Check the corresponding version checkbox (
,
,
) to enable the feature.
3. Configure the SNMP settings. The settings of the SNMP software should be
the same as the settings you configure here.
4. Click
Save
to save and finish the settings.
5. A reboot is required for the settings to take effect.
Configuring 802.1X Settings
The IEEE 802.1X standard is supported by the cameras and, when the feature is
enabled, the camera data is secured and user authentication is needed when
connecting the camera to the network protected by the IEEE 802.1X.
Before you start:
The authentication server must be configured. Please apply and register a user
name and password for 802.1X in the server.
22
MobileView 9000 & 9100 Series Analog/IP Camera User Manual
