Slide 30
© 2017 United Technologies Corporation.
UltraSync
™
SMART HOME MANAGEMENT HUB
Wired LAN Setup
Wired LAN connection is the easiest to set up, but requires a
physical Ethernet connection to the UltraSync panel. You will
need to provide the internet connection and Ethernet router.
o
Connect UltraSync to power source
o
Connect ethernet cable to the back side of the UltraSync panel
o
On the panel:
•
Press “Menu”
•
Press the “8” button
•
Enter your Installer pin (9713)
•
Press the “6” button
•
Write down the IP address
•
If you hear “IP Address is not configured,” wait 30 seconds and try
again
o
Enter the IP address into address bar of a web browser and log in
