5
12.2
95-8616
IMPORTANT SAFETY NOTES
CAUTION
The wiring procedures in this manual are intended
to ensure proper functioning of the device under
normal conditions. However, because of the
many variations in wiring codes and regulations,
total compliance to these ordinances cannot be
guaranteed. Be certain that all wiring complies
with the NEC as well as all local codes. If in doubt,
consult the authority having jurisdiction before
wiring the system. Installation must be done by a
properly trained person.
CAUTION
This product has been tested and approved
for use in hazardous areas. However, it must
be properly installed and used only under the
conditions specified within this manual and
the specific approval certificates. Any device
modification, improper installation, or use in a
faulty or incomplete configuration will render
warranty and product certifications invalid.
CAUTION
The GT3000 contains no field repairable
components. User performed service is limited to
replacement of the gas sensor module.
CAUTION
Hazardous location temperature limits exceed
the product operational temperature limits. If the
sensor is exposed to temperatures beyond the
operational temperature limits listed in Appendix
F, then the sensor module (GTS) should be
replaced or a response test, as described in
the GT3000 Safety Manual (95-8685), shall be
performed.
LIABILITIES
The manufacturer’s warranty for this product is
void, and all liability for proper function of the
detector is irrevocably transferred to the owner or
operator in the event that the device is serviced or
repaired by personnel not employed or authorized
by Detector Electronics Corporation, or if the
device is used in a manner not conforming to its
intended use.
CAUTION
Observe precautions for handling electrostatic
sensitive devices.
NOTE
The sensor housing is made of Polyphthalamide
(PPA), 30% carbon filled (Material Manufacturer
RTP). Questions regarding chemical resistance
should be addressed to:
www.det-tronics.com
US toll free 800-468-3244 or 952-941-5665