United Technologies Carrier 42AM, Control Manual

Page: 8 / 24

EN - 6
c) Assigning pLDPRO/Master EC Mono Box display links:
●
Connect the display to the Master EC Mono Box
●
To switch to configuration mode, simultaneously press the

,

and , keys for approx. 5 seconds; the page shown below
will be displayed, with the cursor flashing in the top left corner:
Display address
Setting ……………. : 00
I/O Board address : --
●
Press

.
●
Change the Display address setting from 00 to 32 by pressing

, then press

.
Display address
Changed
●
Press

,

and again for approx. 5 seconds, the page below will display:
Display address
Setting ……………… : 32
I/O Board address : --
●
Change the I/O Board address by pressing

twice to position the cursor to – and move to 01 by pressing

, then press

.
Terminal config
Press Enter
To continue
●
Press

again.
P:01 Adr Priv/Shared
Trm1 -- Pr
Trm2 None --
Trm3 None -- Ok?No
●
Set Trm1 to 32 by pressing

, press

.
●
Set value 'Pr' (Private) to 'Sh' (Shared) by pressing

, press

.