-3-
HEATING SPECIFICATIONS
Fuel Burn Rate*
1.5 - 5.0 lbs./hr. (0.7 - 2.3 kg/hr)
Burn Time (lowest setting)
80 hrs.
Hopper Capacity
130lbs. (59kg)
DIMENSIONS
Height
34 in. (864mm)
Width
26 in. (660mm)
Depth
26 in. (686mm)
Weight
210 lbs. (95.5kg)
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%.
Use PFI listed fuel for best results.
ELECTRICAL SPECIFICATIONS
Electrical Rating
110-120 volts, 60 HZ, 3.0 Amps
Watts (operational)
175 (approx.)
Watts (igniter running)
425 (approx.)
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with the Pellet Fuels Institute(PFI)
standards (minimum of 40 lbs per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than 8,200
BTU/lb, moisture under 8%by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that
are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced performance.
Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the
space required for refueling and ash removal. Doing so could result in a house fire.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been safety tested and listed to ASTM E 1509-2012, ULC-S627-00 and (UM) 84-HUD by OMNI-
Test Laboratories, Inc. Portland, Oregon, USA.
Specifications
WARNING: It is against federal regulations to operate this wood heater in a manner inconsistent with the
operating instructions in the owner’s manual.
Note: Register your product on line at www.usstove.com. Save your receipt with your records for any claims.
