■
8
│
GB
│
IE
ULG 350 B1
Preparing for cold lamination
IMPORTANT
►
After hot laminating, allow the laminator to cool down completely before
beginning with cold lamination . Bear in mind, the rollers inside the laminator
will still be hot . This could damage the laminating pouch and the document
to be laminated!
♦
Insert the plug of the laminator into a mains power socket .
♦
Switch the appliance on by pushing the On/Off switch
5
to the “
ON
” position .
The red
Power
indicator light
2
lights up .
♦
Set the selector switch for hot and cold lamination
6
to “
COLD
” . The green
Ready
indicator light
3
lights up .
♦
Place the pouch thickness switch
4
at the corresponding pouch thickness
(see also chapter
Switching levels
) .
♦
Place the document to be laminated into a laminating pouch of the appropriate
size .
NOTICE
►
Ensure that all edges of the document have at least two millimetres of space
to the edges of the laminating pouch, as shown in Fig . 1 .
►
Make certain that you use only one pouch for laminating . First flip it up, as
shown in Fig . 2 .
►
For further information about the lamination process, please read the section
Lamination process
.
Summary of Contents for ULG 350 B1
Page 3: ...1 2 3 5 6 7 4...
