GB│IE│NI
│
5
■
UAV 190 A1
Operation
NOTE
►
As every shredder is tested for functionality after manufacture, it is possible
that you may find paper residue in the cutting blades.
●
Place the shredder on a suitable container:
place the broad end of the appliance on the edge of the container. Then pull
out the telescopic arm
until it sits securely on the other edge.
●
Insert the plug into a mains power socket.
Operation
You can shred up to 6 sheets (80 g/m
2
paper) at the same time.
CAUTION! MATERIAL DAMAGE!
Remove all paper clips or staples before inserting the paper
into the cutter opening
. The cutting blades might otherwise
be damaged.
Using auto mode
●
Set the switch
to the "AUTO" for shredding. The motor starts automatically
as soon you insert paper and switches off automatically once no further
paper is inserted.
NOTE
►
Always insert smaller pieces of paper into the middle of the cutter opening
.
This is where the contact that starts the cutting process is located.
Clearing a material blockage
●
Move the switch
to the "REV" ("reverse") position if the paper being
shredded causes a blockage.
The appliance now goes into reverse and the paper that is being shredded
is ejected.
●
Pull the paper out of the appliance, then set the switch
to "AUTO".
●
The appliance is now ready for use.
Summary of Contents for 279909
Page 3: ......
