INFRESCO-T™
Users & Installation Manual
For
Infresco S 4kW
RoHS Compliant
Directive
2002/95/EC
X20034 Issue 3 27/10/11
Wiring Diagram
UNITED AUTOMATION LIMITED
1 Southport Business Park
Tel: 0044 (0) 1704 – 516500 Main
Kew
Tel: 0044 (0) 1704 - 516516 Sales
Southport, PR8 4HQ
Fax: 0044 (0) 1704 – 516501
ENGLAND
Additional Information when using remote switch:
When using a remote switch it is important than an additional gland (Not Supplied) is used to
ensure the IP rating is maintained.
The rear of the enclosure containing the pcb, This will need to be removed before attempting to
fit the additional gland. Remove the 4 fixing screws and remove the pcb. You can then knock
out the knockout and fit the additional gland as shown above. This should be done very
carefully using a screwdriver. Refit the pcb.
Remove the link that is fitted into the INPUT/COM terminals and wire in the switch wires
Once the additional gland has been fitted the units should be mounted as shown above.
This is the only time the unit should be mounted in this way. If the additional switch is not
being used then the unit must be fitted with the gland facing down.
Once the unit is wired, the lid should be fitted as shown
