EN
6/14
www.uniteck.fr
UNIFIX 20.1 WB
PANEL COMPATABILITY
Unfix 20.1 WB can fix 1 panel with 4 holes in the frame at the spacing as below:
260 mm
120 mm
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load
with the panel:
Support
Panel
Unifix 20.1 WB = 1,3 kg Unisun 10.12M /10.24M / 20.12M / 20.24M =1.3kg /1,3kg/ 2kg / 2kg
Fastening
: to prevent large quantities of snow from accumulating behind the sensor, install
appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow
(eg tree)
Before attaching and connecting, please observe:
•
the maximum distances between each element shown below.
•
connecting order
For instructions for the installation of the bracket see page 12
SAFETY INSTRUCTIONS
•
Take the appropriate mesures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
When finished, check and ensure that all of your brackets and panels are fixed properly.
