Set the Angles
INSTRUCTION MANUAL
TUBE BENDER
PAGE: 8
Actual angle of the tooling
Back poınt . This function does not apply to this machine
Required setting angle.
This button does not require activating
Setting the required angle
.
●
Press PROG to find Set-2
●
Use up/down buttons to select the required angle. Value
will display in the Set-2 window.
●
Press PROG to secure value.
●
To bend, press and gold the right pedal. The former will
stop at the required angle.
●
Release the pedal and the former will stay. Press and
release the left pedal and the former will return to its
back point.
