RP901 User Manual
3.12 Buzzer
Beep tones serve as an indication of operation status. For Example, one short
beep signifies a Good Read within a Scan Operation and 3 short beeps warn
an error.
3.12.1 Beep Tone
Set the beep volume or disables beeping.
Configuration Method:
Choose one, then click
to transfer the
parameter setting to the RP901.
Default Setting: Medium
3.12.2 Beep Time
Set the beep length for the short beep used to signify a Good Read.
Configuration Method:
Choose a value between 50 ~ 500 ms, using
10 ms intervals.
Then click
to transfer the parameter
value to the RP901.
Default Setting: 150 ms
58
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co.,Ltd