10
Unitech PT930SA
If a PCMCIA card is inserted into the PT930SA
without previously attaching a Pulling Tag, the card
can be removed by affixing a length of adhesive tape
to the surface of the card and pulling the card out by
pulling outward on the piece of tape.
PCMCIA Pulling Tags
Pulling Tags simplify the removal of PCMCIA cards from the
PT930SA. Before inserting a PCMCIA card, remove one of the
three Pulling Tags from the Pulling Tag sheet and adhere it to
both sides of the PCMCIA card, leaving a short (approx. ½”) tab.
To remove the PCMCIA card, simply pull outward on this tab.
Protective Screen Film
The PT930SA screen ships with a protective plastic film. You may remove this if
desired by peeling from one corner. The screen will be more susceptible to
scratching without the film, but will be more readable.
Using the Stylus
CAUTION:
Never use anything other than the PT930SA’s stylus on
the screen. Using another object as a stylus could cause perma-
nent damage.
To write data into a field on a form, use the stylus to print the letters
or numbers. Use very light pressure.
3.
To make a choice from a menu, lightly tap the tip of the stylus on
that choice.
2.
Hold the stylus as you would a pencil.
1.
Frontside of your
PCMCIA card
