PT630D User Reference Guide
unitech Electronic CO. LTD
Unitech Part Number: 400412
7
Figure 0-9: PT630D communication/charging cable (unitech part number:
600598)
Figure 0-10: PT630D Li-Ion Battery (unitech part number: 600538)
Install Main Battery
1. Remove the battery door from the PT630D by moving the screw from battery cover.
2. Insert the battery into the main battery chamber by putting the head (2 point sticking out) into the
locking position first.
3. Reinstalled the battery door and tighten the screw on the battery door again.
Charging
Before using PT630D, main battery must be installed and fully charged. The PT630D is equipped with
3.6V 880m.A.H Lithium-Ion battery (Unitech part number: 600538). It should take 2 to 3 hour to fully
charge the main battery.
There are 2 ways to charge the main battery:
1. Mount the unit on the cradle; connect power adaptor from the back of the cradle to any power outlet.
During charging, LED above power icon will be displayed red. Once it is fully charged, LED will be
turned to green.
2. Or, use the standard charging cable, which is packed with one of unitech PT630D packages or you
can order them separately, together with the power adaptor. Connect the power plug of the adaptor
to the charging cable, then, connect the charging cable to the main unit. Plug the power adaptor to
power outlet, the unit should be in charging. The charging is completed when LED light is shown on
green.
Cradle
Main battery can be charged through attaching to the PT630D charging/communication cradle (part
number: PT063D-1~3) or a quick charging /communication cable (part number: 600598).
Cradle LED Icons
The icon indicates communication. When PT630D is transmitting data with the host
computer, LED will flash, showing that the data is transmitting.
Tail
Head
