33
PA970 User's Manual
Obtaining an IP Address via DHCP Server
Please check with your MIS department to determine whether a DHCP server is available in your
LAN environment. If available, tap the radio button
Obtain an IP address via DHCP
, and then tap
the OK button.
To avoid conflict with your LAN environment, please consult with your MIS department for the
correct TCP/IP setting.
Specifying an IP Address
If there is no DHCP server in your LAN environ-
ment, specify the individual IP address on each
PA970 with the following steps:
Tap the radio button
Specify IP Address
•
Input the proper
IP address, Subnet Mask,
and
Default Gateway
•
Tap the
Name Servers
tab, and then input the
proper
Primary DNS, Secondary DNS, Primary
WINS,
and
Secondary WINS
•
To change the above settings, please perform the
following steps:
Tap Start, Control Panel
•
Double tap the Network icon
•
Select the proper RF card driver and then tap
the Properties button
•
