PA720 User’s Manual
1.4.2 Charging the Battery
Before using the terminal for the first time, you need to charge it for about 24
hours. After that, you can charge the terminal for 4 hours to recharge the
battery to full capacity. Charge the terminal using the USB charging cable or
the docking station.
1. After PA720 is connected to the charging cable, push up the release
buttons on the both sides of the USB charging cable to lock PA720.
2. Use USB charging cable to connect the AC adapter.
3. Plug the AC adapter cord into an electrical outlet.
3
1
2
Release Buttons
Push up : Lock
Push down: Unlock
10
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
