6
Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Connecting Power
Follow these instructions to connect power to the MT650.
1. Plug the 12V DC connector into the terminal block (1)
2. Plug the adapter into a power socket (2).
3. Switch on the battery switch to
charge the battery.
Charging the Battery
Before using the MT650 for the first time, you need to charge it for about 22
hours. The battery begins charging as soon as you connect the power cable
and then turn ON the battery switch.
Turning the MT650 on for the First Time
After you have initially charged your device for about 22 hours, the device is
ready to be used. You can now start up your device where you’ll calibrate the
display, and set up the system time zone, date and time.
Powering On
The MT650 automatically starts when the 12V DC power adapter is plugged-in.
The MT650 welcome screen appears followed by the Windows CE screen.
Terminal Block connector
Summary of Contents for MT650
Page 8: ......
